![]() ![]() 2.2 Select the vehicle type and select PCM control units. Then press 2.3 Switch to the Maintenance/repairs menu. Select the Function enable function. Then press 2.4 Select the Logbook function.Įnter the code and confirm by touching the Status cell. Press to execute. Wait until the message Enable was successful appears. Then press .Ģ.5 Touch the Overview cell to return to the control unit overview. The procedure described here has been structured in general terms different text or additions may appear on the PIWIS Tester 2 9818 .Ģ.1 PIWIS Tester 2 9818 must be connected and ignition switched on. INFORMATION: The PIWIS Tester 2 9818 instructions take precedence since the description may be different with later Tester releases. Switch off the ignition and remove the ignition key before disconnecting the control unit.Įnsure that the power supply is not interrupted during programming.Ĭonnect a battery charger with a current rating of at least Nominal value 40 A to the vehicle battery. Malfunctions in control unit, even during programming. Risk of irreparable damage to control unit 1. Connect a battery charger. -> Workshop Manual '2X00IN Battery trickle charging'
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |